Skip to content

SINTEF Blog Gå til forsiden

  • Energy
  • Ocean
  • Digital
  • Health
  • Industry
  • Climate and environment
  • Building
  • Society
  • EN
  • NO
Energy

A reference grid with Norwegian considerations

By using data from a real distribution grid, CINELDI has developed a more relevant reference grid for researching Norwegian smart grids.

Strømnett over lysende by
authors
Olav Bjarte Fosso
Professor
Gerd Kjølle
Chief Scientist
Published: 5. Apr 2022 | Last edited: 7. Apr 2025
2 min. reading
Comments (0)

 

A reference grid is a digital representation of the electricity grid. Such digital reference grids are used to test new technologies, various possible scenarios, and potential challenges. This makes it possible to visualise the effect of adding different elements to an existing grid; elements such as renewable power production, charging stations for electric cars and new patterns of consumption. The digital representation can then highlight potential issues. This is an incredibly useful tool for scientists and industry partners alike. 

There are a number of international reference grids in use, but they pose several challenges. These grids are usually designed for academic purposes and are therefore not always applicable to real life simulations. Another issue is that they are usually based on international data. This is less than ideal when researching challenges specific to Norwegian distribution grids. Because of this, CINELDI has been working to establish a Norwegian reference grid. The work began in 2020, and the first high voltage reference grid was finalised in 2021. 

CINELDI was granted access to data from a high voltage distribution grid, through a Norwegian grid company. The grid in question was chosen because it has properties which make it representative of the Norwegian grid. All data has been anonymised, to ensure the reference grid can be made openly available to scientists without compromising the security of the grid data. This means that the various components of the reference grid are described in such a way that does not make it possible for users to identify which real-world grid it’s based on. The advantage of this approach is that it makes it easier to define new problems and adjust the reference grid to our research needs.  

During the period 2022-2024, security of supply will be the main research subject for CINELDI. In this work, the reference grid will be an important tool to test different strategies for ensuring security of supply. It has already been well received by our partners, as well as other interested parties.  Moving forward, we wish for this reference grid to become an accepted part of the toolbox used by both national and international actors. 

 

Comments

No comments yet. Be the first to comment!

Leave a comment Cancel reply

Your email address will not be published. Required fields are marked *

More about Energy

How much can energy-efficient voyage planning save? Evidence from 11 months of North Atlantic data

Author Image
Author Image
2 forfattere
Infographic showing the flow of thermal energy storage (TES) from surplus heat or cold to end users. On the left, red and blue thermometer icons represent surplus heat and cooling, accompanied by the text “Surplus heat or cold – Captured and stored for when it’s needed.” In the centre, a large panel titled “Thermal Energy Storage (TES)” presents three storage technologies. The top section, “Sensible TES,” shows a container with a thermometer and the text “Stores heat in one single phase.” The middle section, “Latent TES,” shows a water droplet and snowflake connected by circular arrows, with the text “Stores heat through phase change.” The bottom section, “Thermochemical TES,” shows two connected coloured circles that separate and reconnect, illustrating a reversible reaction, with the text “Stores heat through reversible reactions.” A large pale arrow-shaped wedge points from the TES panel toward the right side of the figure. On the right, three application areas are shown in separate boxes with icons: industrial processes, buildings, and data centres. The layout conveys that surplus heat or cold can be stored using sensible, latent, or thermochemical TES technologies and later supplied to industrial facilities, buildings, and data centres.

Thermal energy storage is already commercial  

Jorge Salgado Beceiro
Jorge Salgado Beceiro
Research Manager

Burning ammonia cleanly: How timing changes everything 

Author Image
Author Image
2 forfattere

Technology for a better society

  • About this blog
  • How to write a science blog
  • Sign up for our newsletter
  • News from NTNU and SINTEF
  • Facebook
Gå til SINTEF.no
SINTEF logo
© 2026 SINTEF Foundation
Privacy Editorial Press contacts Website by Headspin