Skip to content

SINTEF Blog Gå til forsiden

  • Energy
  • Ocean
  • Digital
  • Health
  • Industry
  • Climate and environment
  • Building
  • Society
  • EN
  • NO
Energy

NCCS at GHGT-14: Presentations and posters

author
Amy Brunsvold
Research Manager
Published: 10. Dec 2018 | Last edited: 11. Apr 2025
3 min. reading
Comments (0)

At GHGT-14 (Greenhouse Gas Control Technologies conference) in October, FME NCCS had seven oral presentations and 6 poster presentations.

Learn more about CCS

Join our newsletter to stay updated with all the latest research results and news from NCCS: The Norwegian CCS Research Centre.

NCCS at GHGT-14

Oral presentations

1) Profiting from CCS innovations: A study to measure potential value creation from CCS research and development.
Sigmund Ø. Størset (SINTEF Energy Research), Grethe Tangen (SINTEF Industry).

2) Norwegian large-scale CO2 storage project (Smeaheia): baseline geophysical models
Bastien Dupuy, Verónica Torres, Anouar Romdhane, Amir Ghaderi (SINTEF Industry)

3) 3D fault integrity screening for Smeaheia CO2 injection site
Skurtveit, Elin (NGI), Choi, J.C. (NGI), Osmond, J.L. (UIO), Mulrooney, M. (UIO), and Braathen, A. (UIO)

4) Identifying optimal conditions for transport of CO2 by ship
Geir Skaugen, Simon Roussanaly, Han Deng (SINTEF Energy Research), Jana Jakobsen (NTNU)

5) CO2 storage with mobility control
Alv-Arne Grimstad, Per Bergmo (SINTEF Industry), Halvor Møll Nilsen SINTEF Digital), Øystein Klemetsdal (NTNU)

6) The cost of delaying or missing CCS and BECCS deployment ambitions to the benefit of Direct Air Capture
Ozgu Turgut (NTNU), Simon Roussanaly (SINTEF Energy Research), Andrea Ramirez (Delft Univ.), Asgeir Tomasgård (NTNU), Mijndert Van Der Spek (ETH)

7) The effect of brine supply on CO2 injectivity impairment due to salt precipitation
Jelena Todorovic, Martin Raphaug, Thomas Monge Øia, Alv-Arne Grimstad, Pierre Cerasi (SINTEF Industry)

Poster presentations

1) The Norwegian CCS Research Centre (NCCS): Facilitating industry-driven innovation for fast-track CCS deployment
Amy L. Brunsvold, Mona J. Mølnvik, Anne Steenstrup-Duch, Sigmund Ø. Størset, Rune Aarlien (SINTEF Energy Research), Grethe Tangen (SINTEF Industry), James Dawson (NTNU), Alvar Braathen (UIO)

2) Multi-component Analysis of Liquid Samples by FTIR
Andreas Grimstvedt, Merete Wiig, Aslak Einbu, Ugochukwu Edwin Aronu, and Solrun Johanne Vevelstad (SINTEF Industry)

3) Modelling leakage risk along a fault using Modified Discrete Elements
Mats Rongved (NTNU), Anthony Delbar (École Polytechnique), Pierre Cerasi, and Andreas Bauer (SINTEF Industry)

4) Need and measurements of accurate thermodynamic data for CCS
Sigurd W. Løvseth, Snorre Foss Westman, Anders Austegard, Hans Georg Jacob Stang (SINTEF Energy Research)

5) Bandlimited optimal AVO inversion for improved quantitative imaging of the CO2 Plume
Amir Ghaderi, Bastien Dupuy, Etor Querendez, Peder Eliasson (SINTEF Industry)

6) Optimized geophysical survey design for CO2 monitoring – A synthetic study
Anouar Romdhane, Peder Eliasson (1SINTEF Industry)

NCCS plenary presentation at GHGT-14

Centre Director Mona Mølnvik had a plenary presentation where she presented FME NCCS and how the Centre works to fast-track CCS deployment. She summarises her presentation in the video below:

 

Comments

No comments yet. Be the first to comment!

Leave a comment Cancel reply

Your email address will not be published. Required fields are marked *

More about Energy

How much can energy-efficient voyage planning save? Evidence from 11 months of North Atlantic data

Author Image
Author Image
2 forfattere
Infographic showing the flow of thermal energy storage (TES) from surplus heat or cold to end users. On the left, red and blue thermometer icons represent surplus heat and cooling, accompanied by the text “Surplus heat or cold – Captured and stored for when it’s needed.” In the centre, a large panel titled “Thermal Energy Storage (TES)” presents three storage technologies. The top section, “Sensible TES,” shows a container with a thermometer and the text “Stores heat in one single phase.” The middle section, “Latent TES,” shows a water droplet and snowflake connected by circular arrows, with the text “Stores heat through phase change.” The bottom section, “Thermochemical TES,” shows two connected coloured circles that separate and reconnect, illustrating a reversible reaction, with the text “Stores heat through reversible reactions.” A large pale arrow-shaped wedge points from the TES panel toward the right side of the figure. On the right, three application areas are shown in separate boxes with icons: industrial processes, buildings, and data centres. The layout conveys that surplus heat or cold can be stored using sensible, latent, or thermochemical TES technologies and later supplied to industrial facilities, buildings, and data centres.

Thermal energy storage is already commercial  

Jorge Salgado Beceiro
Jorge Salgado Beceiro
Research Manager

Burning ammonia cleanly: How timing changes everything 

Author Image
Author Image
2 forfattere

Technology for a better society

  • About this blog
  • How to write a science blog
  • Sign up for our newsletter
  • News from NTNU and SINTEF
  • Facebook
Gå til SINTEF.no
SINTEF logo
© 2026 SINTEF Foundation
Privacy Editorial Press contacts Website by Headspin