New method enabling the ‘direct numerical simulation’ of three-phase flow of carbon dioxide

Bloggers: Svend Tollak Munkejord, Magnus Aa. Gjennestad, Andrea Gruber, Karl Yngve Lervåg, Åsmund Ervik and Morten Hammer

The IPCC Fifth Assessment Report points out that CO₂ capture and storage (CCS) is one of the essential technologies to mitigate climate change. CCS systems need to be designed and operated in a safe and efficient way, and accurate models and data are a prerequisite to do that.

• Find out more about SINTEF’s research on CCS

We have been working on the development of models to describe the flow inside, and out of, pipes and wells, see e.g. our blog ‘CO₂ transport requires quantification’. These models describe the flow in one dimension. For some applications, such as simulations of the near field of a CO₂ jet resulting from the decompression of equipment containing high-pressure CO₂, this is not detailed enough and one needs to consider the full three-dimensional nature of the flow.

 

High-order parallel computations

In the project ‘3D Multifluid Flow’, funded by the Research Council of Norway through the basic grant to SINTEF Energy Research, we have combined our models describing the thermodynamic behaviour of gas, liquid and solid CO₂ (and combinations) with highly accurate numerical methods for 3D flow. Such methods can describe the flows with a given accuracy with less CPU cost than more conventional methods. Nevertheless, the multiphase flow of CO₂ is highly complex and the computations must be run in parallel on large computers. Some of the computations were run on the Notur high-performance computing infrastructure.

Validation for a barrel shock

This work was recently published as an article in the Journal of Computational Physics. (The article may also be read in the form of a preprint). In the article, we verify and validate our new simulation code on test cases and data from the literature. In particular, we consider the direct numerical simulation (DNS) of an air jet. In this context, DNS means that the turbulence is described with a method resolving the flow both temporally and spatially, without resorting to turbulence models. Finally, we consider the flow of pressurized CO₂ exiting through a small nozzle, forming a highly underexpanded jet and containing gas, liquid and solid CO₂. In this situation, a barrel shock is formed, and the shape and size of our calculated barrel shocks agree very well with previous laboratory observations. The barrel-like shock structure can be seen in the illustration below.

The above video illustrates the development of turbulence in a CO₂ jet. CO₂ with an initial pressure of 52 bar is flowing out through a nozzle of diameter 1 mm. The colours show the vorticity magnitude, a measure of the fluid rotation.

Given these good results, we would like to continue the work on the method and apply it for the calculation of complex CO₂ flows occurring in jets, process equipment and pipelines or wells.